Fix two Raspberry Pi cameras in place
Stereo Camera Plate for Raspberry Pi
Prevents misalignment and ensures a repeatable setup
This is a dedicated plate designed to mount two Raspberry Pi cameras in parallel for stereo imaging.The distance between the cameras (baseline) can be adjusted according to the subject size and shooting distance, allowing you to configure optimal shooting conditions for your application.It is compatible with Raspberry Pi cameras (V2 / V3 / HQ / Global Shutter), as well as third-party cameras with the same board dimensions.
Request a Quote / Contact Us
f you would like a quotation based on product pricing or order quantity, please contact us here.
We will propose the optimal configuration tailored to your specific application and requirements.
For technical inquiries—such as specifications, installation methods, or compatibility with supported devices—please feel free to reach out as well.
Our specialists will support you from pre-deployment planning through to operational use.
Do you have any of these issues?
Do the positions of the two cameras shift out of alignment?
Is the mounting unstable, requiring adjustment every time?
Does the camera placement change with each assembly?
Is it difficult to achieve a repeatable setup?
Solve these issues with a dedicated stereo camera plate
What You Can Do with the Stereo Plate
By maintaining a fixed distance and alignment between the cameras, a highly repeatable setup can be achieved.
Stereo camera mounting
Stable and repeatable positioning
Reduced need for readjustment
Key Applications
Stereo camera setups
Image processing prototyping and development
Research applications
Camera mounting for industrial use
The distance between the cameras can be adjusted.
The camera mounts feature a sliding mechanism, allowing adjustment of the distance between the two cameras (baseline).
The spacing can be optimized according to the subject size and shooting distance. With a ±5 mm adjustment on each side, the baseline can be set within a range of 54 mm to 74 mm.
Additionally, by aligning the groove on the stereo camera plate with the groove on the slider, the baseline can be precisely set to 64 mm, which is the standard value for 3D imaging.
Camera Integration Guide
The camera mounting on the plate depends on the camera and conversion module to be used.
Please refer to the following page for the installation method.
*Spacers are included.
Spacers and screws >
Aluminum die-cast
The stereo camera plate is made of die-cast aluminum for robustness and durability, so there are no problems with distortion.
Camera screw holes
The stereo camera plate has standard 1/4-20” threaded holes in photographic equipment for convenient camera mounting, so it can be secured to a tripod, head, or attached to a threaded level.
Request a Quote / Contact Us
f you would like a quotation based on product pricing or order quantity, please contact us here.
We will propose the optimal configuration tailored to your specific application and requirements.
For technical inquiries—such as specifications, installation methods, or compatibility with supported devices—please feel free to reach out as well.
Our specialists will support you from pre-deployment planning through to operational use.
Configuration Example (Recommended)
Supports cable extension modules
The stereo camera plate can be used with an integrated module to change the cable connecting the camera to an HDMI or LAN cable.
For example, in the photo above, two Raspberry Pi cameras connected to a Raspberry Pi 5 are connected to the stereo camera plate. The cable is FFC, which is too short and inconvenient, so a 1.5m HDMI cable is used, converted to HDMI with the CSI-HDMI conversion module.
The THine Cable Extension Kit THSER102A converts the cable to Ethernet and allows the camera to be extended up to 10 meters using a LAN cable, increasing the flexibility of the camera’s installation and routing.
Cable Extension Set
We also sell a set that includes an HDMI conversion kit and an Ethernet conversion kit, as well as the cables and levels necessary for connection. Since all necessary items are included, simply connect the camera and it is ready to use.
Related Products
Request a Quote / Contact Us
f you would like a quotation based on product pricing or order quantity, please contact us here.
We will propose the optimal configuration tailored to your specific application and requirements.
For technical inquiries—such as specifications, installation methods, or compatibility with supported devices—please feel free to reach out as well.
Our specialists will support you from pre-deployment planning through to operational use.