Entaniya Cube Case 01
This is a case that can hold the main unit of a Single Board Computers(For example Raspberry Pi 3 or 4, Arduino etc…).
The case has a high-quality machined aluminum frame, with options such as interchangeable acrylic panels and perforated panels that allow cables to pass through.
*The weatherproof case for the RaspberryPi camera (WC-01) and a Single Board Computer body is not included.
Feature
High quality machined aluminum frame
The seamless frame, machined from a block of aluminum, is the ultimate in high quality.
It is just the right size to hold the RaspberryPi.
Compact size
With a square cube measuring 115 mm on each side, this case is just the right size to house the main body of a 1.8″ single-board computer such as the Raspberry Pi.
Replaceable panels
The panels are replaceable and can be installed and removed on all six sides.
All-weather dust and drip-proof
Dustproof and dripproof by using a sealing mat.
Panels
There are two types of Panels: the flat type with no holes, and the open-hole type that allows cables and wires to pass through.
Screws
High quality screws are used for fixing the panel.
Complete Set
This is a complete set with all the parts.
In addition to the five acrylic panels, one perforated panel is included in the set.
The pace plate can be either tripod screw hole type or flat type.
*The photo shows the assembly image.
| Product Name | Entaniya Cube Case 01 TS | Entaniya Cube Case 01 |
| Base Plate Type | Tripod screw hole type | Flat type |
| Included Items | Machined aluminum frame 5 x Acrylic panels 1 x Perforated panel 6 x Sealing mats 1 x Aluminum bottom panel 1 x Spacers 1 x Tripod screw hole parts 4 x Pad for legs 1 x Aluminum plate for pedestal 4 x Legs for pedestal Screws for mounting | Machined aluminum frame 5 x Acrylic panels 1 x Perforated panel 6 x Sealing mats 1 x Polycarbonate bottom panel 1 x Spacers 1 x Tripod screw hole parts 4 x Pad for legs 1 x Aluminum plate for pedestal 4 x Legs for pedestal Screws for mounting |
| Weight | 691g | 658g |
| Product Number | CC-01-TS | CC-01 |
| Price | 24,480JPY（tax-exclusive price） | 23,660JPY（tax-exclusive price） |
Individual parts
You can order each part of the Entaniya Cuber Case.
Frame
This is a beautiful, high-class, lightweight, high-strength frame machined from a block of aluminum.
| Product Name | Entaniya Cube Case Frame |
| Included Items | 1 x Machined aluminum frame |
| Weight | 363g |
| Product Number | CC-FL |
| Price | 18,000JPY（tax-exclusive price） |
Base Plate｜(Tripod screw hole type, flat type)
This is a base plate for use on the bottom of the cube.
Tripod screw hole type with 3/8″ screw hole (*Not included 1/4″ screw converter) or flat type is available.
| Product Name | Entaniya Cube Case Base Plate Tripod Socket | Entaniya Cube Case Base Plate |
| Bottom Type | Tripod screw hole type with 1/4″ screw hole | Flat type |
 |  | |
| Included Items | 1 x Aluminum bottom panel 1 x Spacers 1 x Tripod Screw Hole Parts 4 x Polon feet 3 x Mounting screws 4 x Screws for panel | 1 x Polycarbonate bottom panel 1 x Polycarbonate bottom panel 3 x Bolts for mounting 4 x Screws for panel |
| Weight | 77g | 36g |
| Product Number | CC-BP-TS | CC-BP |
| Price | 1,700JPY（tax-exclusive price） | 880JPY（tax-exclusive price） |
Aluminum Plate for Pedestal
The aluminum plate also serves as a heat sink that can be used as a pedestal for fixing the RaspberryPi main unit.
The position can also be adjusted.
*The black bottom panel is sold separately.（CC-BP-TS / CC-BP）
| Product Name | Entaniya Cube Case Aluminum Plate |
| Included Items | 1 x Aluminum plate for pedestal 4 x Bolts for fixing 4 x Fixing screws 4 x Nuts 4 x Teflon washers 3 x Pedestal feet 6 x Pedestal fixing screws |
| Weight | 42g |
| Product Number | CC-AP |
| Price | 1,280JPY（tax-exclusive price） |
Acrylic Panel｜(With hole type / Normal type)
These are special panels for the side of the cube.
You can choose between a panel with holes for cables or a regular panel without holes.
| Product Name | Entaniya Cube Case Acrylic Plate with Hole | Entaniya Cube Case Acrylic Plate |
 |  | |
| Included Items | 1 x Panel with holes 4 x Screws for panel | 1 x Normal panel 4 x Screws for pane |
| Weight | 31g | 31g |
| Product Nmuber | CC-ACH | CC-AC |
| Price | 1 plate 600JPY（tax-exclusive price） | 1 plate 400JPY（tax-exclusive price） 5 Plates 2,000JPY（tax-exclusive price） |
Sealing Mat
The sealing mat can be used between the frame and the acrylic panel to provide dust and drip protection.
| Product Name | Entaniya Cube Case Sealing Mat |
| Included Items | 6 x Sealing mats |
| Weight | 9g |
| Product Nmuber | CC-SM |
| Price | 500JPY（tax-exclusive price） |
Material
Related Product
All-weather Case
The Entaniya Waterproof Case is an all-weather case for surveillance cameras, fixed-point observation cameras, industrial cameras, VR, AI, robotics, and embedded camera boards using Raspberry Pi and SPRESENSE.
- This product should not be incorporated into or used in medical equipment, nuclear facilities and equipment, aerospace equipment, transportation equipment and equipment that affect human life, or equipment, equipment or systems that require a high degree of reliability. Not intended. We will not be held responsible for any personal injury or social damage caused by using this product for these purposes.
- We are not responsible for any direct or indirect damage caused by the failure of this product or its use.
*We have made every effort to ensure the quality of this product, but it is not a genuine product from the manufacturer. Please be careful when using it and use it at your own risk. - This product is based on a concept developed by REC-DESIGN.