{"id":2642,"date":"2023-01-30T11:26:50","date_gmt":"2023-01-30T02:26:50","guid":{"rendered":"https:\/\/e-products.entaniya.co.jp\/en\/?page_id=2642"},"modified":"2023-10-24T12:44:31","modified_gmt":"2023-10-24T03:44:31","slug":"raspberry-pi-hq-camera-m12-lens-mount-adapter","status":"publish","type":"page","link":"https:\/\/e-products.entaniya.co.jp\/en\/list\/product-list\/raspberry-pi-hq-camera-m12-lens-mount-adapter\/","title":{"rendered":"Raspberry Pi HQ Camera M12 Lens Mount Adapter"},"content":{"rendered":"\n
<\/div>\n\n\n\n

Raspberry Pi HQ Camera M12 Lens Mount Adapter<\/h2>\n\n\n
\n
\"\"<\/figure><\/div>\n\n\n

This kit is designed to allow M12\/P0.5 (S-mount) lenses to be attached to the Raspberry Pi HQ camera.
By using the \u201cRaspberry Pi HQ Camera M12 Lens Adapter\u201d, you can use M12\/P0.5 (S-mount) lenses, which are available in a wider variety and cheaper and lighter than C\/CS mount lenses.
*Note. Lenses with a mechanical back of 2 mm or less cannot be mounted.<\/p>\n\n\n\n

<\/div>\n\n\n\n
\n
\n
\"\"<\/figure><\/div><\/div>\n\n\n\n
\n

M12 KIT<\/h2>\n\n\n\n

This kit is designed to attach a lens mount adapter by yourself. (* Requires modification of the camera.)<\/p>\n\n\n\n

Product Number\uff1a RP-HQ-M12-KIT
Note: Sold as parts only; RaspberryPi Camera HQ and lens must be purchased separately.<\/p>\n<\/div>\n<\/div>\n\n\n\n

<\/div>\n\n\n\n
\n
DigiKey Store<\/a><\/div>\n<\/div>\n\n\n\n
<\/div>\n\n\n\n

The lens can be fixed<\/h2>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

RP-HQ-M12-KIT is equipped with a screw for fixing the lens.
M12 lenses are screwed into the adapter while the lens is being adjusted for focus.
Therefore, if the lens is not secured, there are problems such as touching the lens or shifting the focus position due to vibration.<\/p>\n\n\n\n

Raspberry Pi HQ camera M12 lens adapter has lens fixing screws on the side of the adapter to fix the focus and solve these problems.<\/p>\n\n\n\n

<\/div>\n\n\n\n

Interchangeable lenses<\/h2>\n\n\n
\n
\"\"<\/figure><\/div>\n\n\n

You can select an M12\/P0.5 (S-mount) lens that is compatible with the Raspberry Pi HQ camera M12 lens adapter.
Commercially available M12\/P0.5 (S-mount) lenses can also be used, but some lenses may not be able to focus.<\/p>\n\n\n\n

\n
\n
\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L185<\/h2>\n\n\n\n

Fisheye lens with a 185\u00b0 .
A circumferential image can be obtained in the center of the image.<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L125<\/h2>\n\n\n\n

This lens provides a horizontal field of view of approximately 120\u00b0.
\u3000
<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L100<\/h2>\n\n\n\n

This lens is recommended if you want to capture the widest possible wide-angle image with your HQ camera.<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L85<\/h2>\n\n\n\n

This lens produces high quality, sharp images at wide angles.
\u3000<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\n
\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L55<\/h2>\n\n\n\n

This lens provides an angle of view close to that of a standard lens with minimal barrel distortion.<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
\"\"\/<\/a><\/figure>\n\n\n\n

RP-L20<\/h2>\n\n\n\n

This lens allows the Raspberry Pi HQ camera to be used as a telephoto camera.
\u3000<\/p>\n\n\n\n

\n
More Info<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
<\/div>\n<\/div>\n\n\n\n
<\/div>\n\n\n\n

Installation<\/h2>\n\n\n\n

Easy to install and return to the original<\/h2>\n\n\n\n

The mounting adapter for the Raspberry Pi HQ camera needs to be replaced, but this is easily done. The camera can also be used as the original camera by changing back to the HQ camera\u2019s original mount adapter.<\/p>\n\n\n\n