Waterproof Camera Case

for Raspberry Pi Cameras

This waterproof camera case is useful for outdoor installation of the Raspberry Pi camera.
The case is designed to be used with a Raspberry Pi camera with an extended cable (up to 10m) using HDMI or Ethernet conversion modules.

10080
Size100 x 100 x 75 mm80 x 80 x 60 mm
Back hole1 x for vent filter
1 x for cable gland
1 x for vent filter
1 x for cable gland
Supported CamerasRaspberry Pi camera V2 / V3 / HQ
Entaniya VR220
Raspberry Pi camera V2 / V3 / HQ
Entaniya VR220

How to install the camera in the case

Special plates and spacers are used to install the camera inside the case. ( included in the accessories ) The camera can be fixed inside the case with the HDMI conversion board or the Ethernet conversion board incorporated. Two holes (Φ12 and Φ16) are provided for a vent filter to prevent condensation.

*If an HDMI cable with a cable ground is used, the cable ground can be attached through the plug without cable modification.
*If you use an Ethernet cable with a cable gland, the cable needs to be processed to install the cable gland through the hole in the case. (Cutting and splicing). Please contact us for further information and we will be happy to process the cable. (Charged).

Example of system configuration using a camera case

Camera CaseSize 100 Dome Height 30mm Frame Color Matt Clear
CameraRaspberry Pi Cameras
Ethernet conversion boardTHine Camera Cable Extension Kit[THSER102]
Ethernet CablePlug processing required 10m
Waterproof Cube CaseSize 150
1 x Waterproof connector panel with pedestal
1 x RJ45 connector and cable 1m
1 x RJ45 Short cable 15cm
1 x HDMI Connector(stopper)
1 x USB Type C connector and cable1m
1 x USB Type C Short cable 15cm
Raspberry PiRaspberry Pi 4

Acrylic dome shape and frame color

Acrylic domes are available in different sizes, shapes, and frame colors.

10080
window shapeDome Height 50 mm
Dome Height 30 mm
Flat

Flat
frame colorBlack frame
Clear white frame
Black frame
Clear white frame

Optional

Fixing brackets

Mounting hardware for the back of a camera case, the 45-degree angled plate has a 1/4-20” threaded hole in the center for mounting on a tripod or on a dedicated camera case bracket. (Made of stainless steel.)

Learn more about fixing brackets >

Roof

Roof attachment is recommended outdoors or in dusty areas.
The roof prevents the reflection of direct sunlight on the dome cover and the windows from getting dirty from rain and dust.
Use the dedicated mounting hardware to attach the roof.

Learn more about camera case roof >

Related Products

TOP