Camera with Mounting Plate (HDMI)
This product incorporates a camera module (V2/V3) for Raspberry Pi and a mounting plate that facilitates mounting on a tripod or similar.
It incorporates FFC-HDMI conversion board, which connects the camera to the main unit using an HDMI cable.
It can be used over a longer distance (within 2m) than using an FFC cable.
The recommended grade of HDMI cable to be used is “8K Micro HDMI – HDMI 2.1”.
Pi Cam V2 with HDMI + Mounting Plate
Pi Cam V3 with HDMI + Mounting Plate
VR220 Cam with HDMI + Mounting Plate
FFC-HDMI conversion board
FFC-HDMI conversion board is designed to convert the Raspberry Pi camera connection from FFC to HDMI.
It enables connection using an HDMI cable, and the cable can be extended up to a maximum of 2 meters. The recommended grade of HDMI cable to be used is “8K Micro HDMI – HDMI 2.1”.
Safety wire for drop protection
The camera mounting plate is equipped with a hole through which a drop prevention wire can be threaded. When installing the camera in a high place, it is recommended to use a fall prevention wire for safety measures.