LAN Cable with Cable Gland
Ready to use with waterproof case
When using a cable gland to run a cable from a waterproof cable or pull box to the outside, the cable must be modified because the plug will not pass through the cable gland without modification.
However, processing cables requires special tools and time.
With a cable with a cable gland, the cable can be used ready-to-use.
IP68 waterproof performance
When connector-type waterproof cables are used, the waterproof rating is generally up to IP67.
If a cable gland is used, IP68 is available, ensuring higher water resistance.
Ultra-short RJ45 plug
The RJ45 for connection inside the case uses an ultra-short RJ45 plug that is less than half the length of a regular RJ45 plug.
This makes it much easier to handle cables inside a narrow case.
Cable Specifications
This product is a modified version of Sanwa Supply’s (KB-SL5STPS).
The cable is soft and easy to handle.
Therefore, the basic specifications of the cable are the same as those of KB-SL5STPS.
Supports 1Gbps transmission speed
Noise-resistant STP specification
Supported temperature range: -40 to 85°C (-40 to 85°F),
Category 5e
Cable length 3m / 5m / 10m (Due to processing reasons, the cable length may be 20cm shorter than the size indicated.)
Color (blue/white)